Application Instructions

Application Instructions for Everglass ProCoat and Platinum ProCoat.
  1. Use in shade only and not on hot surface (the temperature of surface of the vehicle must be between +5 and +30 degrees by Celsius).
  2. Prepare the surface of vehicle with cleaning or abrasive polishing compounds before coating.
  3. Clean the surface of vehicle also with isopropyl alcohol, white spirits or special cleaners to remove any possible remains of paste and oil.
  4. Check with torch the surface; it is should be without holograms, traces of cleaning, polishing, or other injuries.
  5. Apply the Everglass product to the applicator. Recommended foam applicator with suede microfiber cloth.
  6. The composition is applied by one part. Large bonnet can be separate on two parts. Move flowing hand with applicator with perpendicular moves, with no gaps.
  7. Wipe off coating with new microfiber towel after 1-2 minutes after application. Wipe time depends on the clearcoat properties and the temperature and humidity of the ambient air.
  8. Correctness wipe checked by tactical torch. There should be no streaks and smudges in reflection.
  9. The next layer can be applied after 1-2 hours after application of a previous layer.
  10. The number of protective layers is not limited.
  11. It is recommended to warm up the clearcoat after application of Infra Red lamps for 15-20 minutes at 50-60 Celsius degrees.
  12. After 2-4 hours after application of the protective coating recommends use Everglass TopCoat.
Instructions for Everglass TopCoat.
  1. Shake well bottle before use.
  2. Apply the coating to the applicator. Recommended foam applicator with suede towel.
  3. Topcoat is applied partly. Area is approx. 50cmx50cm. Hand moves with smooth motions, crisscross, with no gaps.
  4. Quickly wipe off coating with new microfiber towel after 30 seconds after application. By hand in a circular motion.
  5. Check tactical torch for any smudges and non-wiped area.
  6. Curing time of the coating – 12 hours.
  7. Waiting time before the first wash – 1 week.
Application Instructions for new Everglass TopCoat.
  1. Use in shade only and not on hot surface (the temperature of surface of the vehicle must be between +5 and +30 degrees by Celsius).
  2. Prepare the surface of vehicle with cleaning or abrasive polishing compounds before coating.
  3. Clean the surface of vehicle also with isopropyl alcohol, white spirit or special cleaners to remove any possible remains of paste and oil.
  4. Check with torch the surface; it should be without holograms, traces of cleaning, polishing, or other injuries.
  1. Shake bottle well before use. Apply the Everglass product to the applicator. Recommended foam applicator with suede microfiber cloth.
  2. Topcoat is applied partly. Area is approx. 50cmx50cm. (Large bonnet can be separate on four parts.) Move applicator with smooth motions, crisscross, with no gaps.
  3. Quickly wipe off coating with new microfiber towel in 15-30 seconds after application by hand in a circular motion.
  4. Wipe time depends on the clearcoat properties and the temperature and humidity of the ambient air.
  5. Correctness wipe checked by tactical torch. There should be no streaks and smudges in reflection.
  6. The next layer can be applied after 1-2 hours after application of a previous layer.
  7. It is recommended to warm up the clearcoat after application of Infra Red lamps for 15-20 minutes at 50-60 Celsius degrees.
  8. Curing time of the coating – 12 hours.
  9. Waiting time before the first wash – 1 week.
Maintenance coated car:
  1. During the first week coating is fully polymerized, so how the vehicle will be serviced in the first week will depend resistance and appearance of the coating. It is recommended that careful handling of the car in the first week after the application.
  2. The first wash is recommended after 7 days with low alkaline shampoo!
  3. If during the first week of the car becomes very dirty, fall under the alternating rain and sun, it is recommended as soon as possible to wash the car with water or weakly alkaline handwash shampoo.
  4. After 2 weeks the car can be operated in the normal mode, avoiding, of course, automatic washing portals.
  5. The recommended frequency washes of car – 1 time per week.
  6. After was wipe the car is recommended to clean soft microfiber towel.

Price:
Category:     Product #:
Regular price: ,
(Sale ends !)      Available from:
Condition: Good ! Order now!

by

+38 (068) 364-25-26

alex@detailing.com.ua

Ukraine, Kiev, пр. Правды, 39